Wave Shape
Wave Shape

SS Vera

Wave Shape

POSITION….. 52 58 000N 001 03 500E
DEPTH… 7Mtrs
TYPE… SHORE AND BOAT
DIMENSIONS… LENGTH 88.2Mtrs / BEAM 11.6Mtrs / DRAUGHT 6Mtrs
TONNAGE…2391 GROSS
CARGO …COAL
DATE OF LOSS…15/11/1914
CAUSE OF LOSS… COLLISION WITH HM MINESWEEPER PARTHIAN
BUILT… 1891 by TURNBULL AND SON, WHITBY
OWNER AT TIME OF LOSS…W.COUPLAND & CO
PROPULSION.. X2 SCOTCH TYPE BOILERS, TRIPLE EXPANSION ENGINE, SINGLE SHAFT, MACHINERY BY BLAIR & CO LTD, STOCKTON ON TEES

The SS Vera was built in 1891 for T Marwood & Sons. She was to change hands several times prior to her sinking, 1901,Suggit & Forth, 1911, Vera SS co Ltd, 1913, W Coupland & Co.

On the 15th November 1914 whilst on route from the Tyne to Livorno with a cargo of coal she was in collision with the minesweeper HMS Parthian. She was beached at Cley, Subsequent attempts to re-float her failed.

The Vera Today

Today the SS Vera is located some 120Mtrs from shore, from which she rests almost parallel to the shoreline. She is best dived on a high water slack, as the lightest of seas can stir up the seabed on a low water slack, in-turn reducing visibility considerably.

As would be expected of any wreck this close to shore the Vera is very broken, however she makes for a very interesting and rewarding dive if conditions allow. For the most part she is a mass of collapsed plates and ribs. Her triple expansion engines can still be seen as can a single boiler. The Vera however is stated as being fitted out with x2 scotch type boilers, question, where is the second boiler? From the engines, heading towards the stern, (following the prop shaft) you will come to an iron propellor, this being her spare.

Visit BSAC.com